Qviart Dual 4k non working remote. [Archivio]

Visualizza la versione completa : Qviart Dual 4k non working remote.

kegnkiwi

08-07-23, 14:29

Good afternoon, i would like to report that your image for the dual 02/07/2023 the remote does not work in any way. I have tried dropping a keymap.xml from a working openatv image usr/share/enigma 2 and rebooting the box but it does not work. I am not sure if you are working with old drivers as the remotes have changed.

^^enri74^^

08-07-23, 17:10

hello thanks for the info but which image are you using 8.3 I have py3 I can't tell you what depends on me with my octagonsf8008 and my vu+zero 4k I have no problem try to set the remote control

^^enri74^^

08-07-23, 19:02

hello try I compiled a new image see if you still have the same problem

https://cobraliberosat.net/UPLOAD/index.php?dir=Qviart/02.07.2023/

kegnkiwi

09-07-23, 07:41

hello try I compiled a new image see if you still have the same problem

https://cobraliberosat.net/UPLOAD/index.php?dir=Qviart/02.07.2023/

Good morning thank you for doing this, I will try this image shortly.

kegnkiwi

09-07-23, 08:20

Good morning @ ^^enri74^^

I have tried to us the multiboot image in slot 4 with openatv as the main image. Once again the remote does not work, but thank you very much for trying. If you decided to try again with this image i would be grateful for the opportunity to test these images for you. I bought my box to play and test images on. :)

Grazie.

^^enri74^^

09-07-23, 09:21

kegnkiwi

09-07-23, 09:39

hello mrgrumpy but with image openatv the remote works for you

Yes the remote works with openatv, slot 1, pure2 slot 2, openspa on slot 3, but not on cobraliberosat on slot 4. What i am doing is now putting the image in slot 3 just to make sure there is not an issue with slot 4 on this reciever.

hello mrgrumpy can you try image py3 to see if there is also the same problem thanks

https://cobraliberosat.net/UPLOAD/index.php?dir=Qviart-py3/09.07.2023/

kegnkiwi

09-07-23, 09:43

I have now tried in slot 3 and its the same result.

^^enri74^^

09-07-23, 09:44

I have now tried in slot 3 and its the same result.

I made a request to openpli let's see if they answer me

kegnkiwi

09-07-23, 10:37

Thank you for your effort, I've also installed your images on my solo 4k and it works great ��

^^enri74^^

09-07-23, 10:48

Thank you for your effort, I've also installed your images on my solo 4k and it works great ��
Can you do a test with this thanks

Qviart Dual 4K_DOWNLOAD (https://uploadfile.pl/pokaz/2246914---cain.html)

kegnkiwi

10-07-23, 08:55

Thank you, I am sorry i missed this yesterday even though i did log into the forum. I will test after work tonight.

kegnkiwi

10-07-23, 17:52

I have tested this image and the remote is now working. :)

Ferret

11-07-23, 15:48

I am told that there are new drivers been prepared for Qviart.

No idea on the time scale or what they will fix but there been worked on.

kegnkiwi

11-07-23, 16:10

I have a working image for the dual from cobralibersat that ^^enri74^^ has been good enough to compile for us. We can post it to the forum if ^^enri74^^ decides that the quality is good enough. The only two issues I have seen are icam channels on 19e not clearing and the overscan wizzard does not seem to reduce the screen size down. I have got around this by swapping the skin the glamourhd.

Ferret

11-07-23, 17:04

Overscan is one of the issues the new driver are going to fix.

kegnkiwi

11-07-23, 18:27

I have this evening run both the cobraliberosat and openpli images and tried a couple of different set ups with oscam and i cannot get the icam channels to work on 19e. I don't have access to 28e in my server so cannot test. I have also used the cobralibertosat image on my solo4k with the exact same set up and these channels on 19e do clear. I would think that its something to do with the openpli image for this box.