info per kegnkiwi

[kegnkiwi]

Any chance of a test image now for the gigablue quad 4k pro that is now supported by openpli ;)

[^^enri74^^]

hello kegnkiwi in the next image there will also be the image for your gbquad4kpro box I"m complicating everything new and I"m also making the feed new as I finish they will be uploaded to the UPLOAD

[kegnkiwi]

Perfect @^^enri74^^ congratulations_oops

[^^enri74^^]

hello kegnkiwi go here https://cobraliberosat.net/iframer4.php?page=UPLOAD I hope it works everything well let me know byebye

[kegnkiwi]

Good evening thank you for the image. Here is a little feed back. I have to say this is a nice image.

Installation set up at 1080p, during set up the algare image seem a little to large for the screen with the colour icons missing from the screen. Once the image was set up and i could enter the overscan wizard and reduce the size of the screen and then everything seems fine. During installation the picture of the remote on the screen is of a dreambox remote.
Once settings had been entered and receiver was ready i installed the following.
Installed linuxsat plugin via putty - OK.
Installed creif rotating settings from ls plugin.
Installed oscam-emu from the plugins menu, but then installed oscam icam levi45 11845-802 from ls plugin
Tested icam channels on 28.2 some opening on the standard channel list - some don't. No option to stream via streamrelay within standard channel list, going into bouquets icam list on 28.2 channel working.
Tested on 19.2 icam channels opening on bouquets.
Tested channels on 9e. working also on 16e.
Timeshift working from the start, this also being due to hdd installed.
Recording working for the short period i tried.
Tried to install autobouquet maker 3.3 from ls, tried two versions but nothing would install. Installed 28.2 bouquets from normal plugins menu and this worked fine.
The image seems to come with now and next graphic card which works.
The graphics on the lcd screen are a little small and not readable from a distance.

Conclusion

Everything seems to work as it should nice image.congratulations_oops

Update. There is no clock on the lcd screen when in standby and when the box reboots or comes out of deep standby its not returning to the channel i left it on.

[^^enri74^^]

Good evening thank you for the image. Here is a little feed back. I have to say this is a nice image.

Installation set up at 1080p, during set up the algare image seem a little to large for the screen with the colour icons missing from the screen. Once the image was set up and i could enter the overscan wizard and reduce the size of the screen and then everything seems fine. During installation the picture of the remote on the screen is of a dreambox remote.
Once settings had been entered and receiver was ready i installed the following.
Installed linuxsat plugin via putty - OK.
Installed creif rotating settings from ls plugin.
Installed oscam-emu from the plugins menu, but then installed oscam icam levi45 11845-802 from ls plugin
Tested icam channels on 28.2 some opening on the standard channel list - some don't. No option to stream via streamrelay within standard channel list, going into bouquets icam list on 28.2 channel working.
Tested on 19.2 icam channels opening on bouquets.
Tested channels on 9e. working also on 16e.
Timeshift working from the start, this also being due to hdd installed.
Recording working for the short period i tried.
Tried to install autobouquet maker 3.3 from ls, tried two versions but nothing would install. Installed 28.2 bouquets from normal plugins menu and this worked fine.
The image seems to come with now and next graphic card which works.
The graphics on the lcd screen are a little small and not readable from a distance.

Conclusion

Everything seems to work as it should nice image.congratulations_oops

Update. There is no clock on the lcd screen when in standby and when the box reboots or comes out of deep standby its not returning to the channel i left it on.

Hi kegnkiwi Thank you for information and for testing the image

Grazie.congratulations_oops