Test CobraLiberoSat

[^^enri74^^]

📡 CobraLiberoSat – Image Enigma2

Se qualcuno vuole testare CobraLiberoSat su qualche modello di decoder, può scrivermi indicando il modello del box.

Se il modello è supportato, posso preparare una build di test dedicata.
🔧 CobraLiberoSat è una image Enigma2 costruita sulla base di OpenATV 7.6, con personalizzazioni e sviluppi del progetto CobraLiberoSat.
👉 Se volete provare una image sul vostro box, scrivetemi il modello e vediamo se è possibile prepararla.

I test e i feedback sono sempre benvenuti! 🐍📡





📡 CobraLiberoSat – Enigma2 Image

If anyone would like to test CobraLiberoSat on a particular receiver model, feel free to contact me and let me know the model of the box.

If the model is supported, I can prepare a dedicated test build.
🔧 CobraLiberoSat is an Enigma2 image built on OpenATV 7.6, with customizations and developments from the CobraLiberoSat project.
👉 If you would like to try the image on your receiver, send me the model and we can see if it is possible to prepare a build for it.
Testing and feedback are always welcome! 🐍📡

[kegnkiwi]

So is this a new set of images now based on openatv 7.6 instead of being built on the openpli images? I would like to try on gigablue quad 4k pro. One thing to ask though isn't openatv 7.6 nearing end of life with all images moving to 8.0?

[^^enri74^^]

So is this a new set of images now based on openatv 7.6 instead of being built on the openpli images? I would like to try on gigablue quad 4k pro. One thing to ask though isn't openatv 7.6 nearing end of life with all images moving to 8.0?

Hi kegnkiwi yes it's a new one based on OpenATV the question you asked me which is moving to version 8.0 I can't tell you but if it doesn't work anymore we'll try with the new version. For the gigablu 4k pro I'll fill it in and then I'll pass it on to you

Thanks friend

[kegnkiwi]

@^^enri74^^ thanks i will take a look when the image is ready. Thanks for letting me try it when its ready.

[^^enri74^^]

@^^enri74^^ thanks i will take a look when the image is ready. Thanks for letting me try it when its ready.

Hi kegnkiwi here it is when you have the time and want to do a test


https://mega.nz/file/IVMU3BSI#lsrT0EliOYsCVhjlxdWcm4EnKQ9xthCPjY3c55fi7 Qo

[kegnkiwi]

Thanks all downloaded and i will put it on my box tomorrow morning.

[kegnkiwi]

Well i installed this image on my gigablue quad 4k pro. The only issue i have seen is at the network selection stage when trying to select the ethernet port there did not seem to be a confirmation so this lead one to think that it need selecting again. Doing this caused me a blue screen twice. On the third attempt i skipped this section and continued on. Everthing else installed fine including screen resizing. The network worked fine even with the issues reported above. Plugin downloads were fine. I installed the linuxsat plugin via telnet and this installs fine and then i installed oscamicam emu. With my connection both the de and uk sky version of the channels i have tried open fine. Autoboquets works fine for 28.2 but it took a couple of installs to get the 28.2 bouquet into my channel list. The installed aglare skin works fine including showing signal details with the correct colours. More testing needed but i intend to use it as my daily image for now. Good work.

[lory94]

for my Zgemma H17 Combo it's possible now ? Thanks

[^^enri74^^]

for my Zgemma H17 Combo it's possible now ? Thanks

yes, how do I fix it because I had to do everything again? When I do it I'll put it on the forum

thanks

[d2mac]

ciao

uclaim 4k pro

sperando che sia compreso il panello cam ,visto che la atv vuole comandi per instalarlo

[kegnkiwi]

ciao

uclaim 4k pro

sperando che sia compreso il panello cam ,visto che la atv vuole comandi per instalarlo

Yes i believe that it is installed, but i also use linuxsatpanel which i send via wget for losts more choice of cams.

[d2mac]

ciao
finito ora di configurare eproavare .
un po lenta nel caricarsi ,
cambio canale nella norma
schare casalingo con 3c ok tvsat
ok le 5 cam instalate e solo da scegliere

e possibile colorare le scritte come scritto nella prima foto ,,perche in base al tv non si vedono i colo ,,nel mio caso o dovutodiminuire l'altezzaa 598

1- https://i.imgur.com/dbsJ1HP.png

2 - https://i.imgur.com/xCznvaI.png

3 - https://i.imgur.com/dMZA7ou.png

4 - https://i.imgur.com/Nbd1yNn.png

5 - https://i.imgur.com/3M4tcCM.png

6 - https://i.imgur.com/l83J2Xb.png

qui e dove o ridotto lo schermo in altezza per vedere tutto

7 - https://i.imgur.com/wGlylwa.png

[kegnkiwi]

I have to also report that i have an issue with the latest image on gigablue quad 4k pro where the box has been crashing a lot. Unfortunately i have been unable to get an error log but it might have something to do with furybiss plugin or something to do with the skin. It's got that bad i had to rescue my box as the image locked up. Now i am going to reflash the image and install the standard skin.

[kegnkiwi]

Hi team, its there any confusion of the download links for the latest image. The latest links are within the cobraliberosat 10 download but that's based on openpli 10 i believe. The test image from a week ago was based on openatv 7.6 but the latest image is based on openatv 8.0.

An update on my earlier postI reinstalled the image, changed the skin to the standard matrix skin, installed crief motorised settings and the linuxsat panel. Downloaded ncam 15.8 and oscamicamall and install my server details. No reboots yet and channels opening fine.

[^^enri74^^]

Hi team, its there any confusion of the download links for the latest image. The latest links are within the cobraliberosat 10 download but that's based on openpli 10 i believe. The test image from a week ago was based on openatv 7.6 but the latest image is based on openatv 8.0.

An update on my earlier postI reinstalled the image, changed the skin to the standard matrix skin, installed crief motorised settings and the linuxsat panel. Downloaded ncam 15.8 and oscamicamall and install my server details. No reboots yet and channels opening fine.

hi kegnkiwi the image from a week ago was 7.6 but since you told me that you had problems with wifi and other things which I don't remember now and you told me that openatv is switching to the new version I made the new version 8.0.1 but it is still based on OpenATV
for the download the writing cobraliberosat 10 was an error but I checked the folder again and it is correct

[kegnkiwi]

Just a nice update on this image. I have been using the latest image all week as my main image but without running the aglare skin and there has not been one reboot. I now have furybiss 7 autobiss feeds plugin installed and working along side ncam 15.8 and the madmax skin. I needed to mount and change the path of my hdd to get videos to record and store but that is working fine. All ok here for now :)

[^^enri74^^]

Just a quick update on this image: I have been using it as my main image all week without running the Aglare skin, and it hasn't rebooted once. I now have the Furybiss 7 AutoBiss Feeds Plugin installed and working alongside the nCam 15.8 and MadMax skins. I had to mount my HDD and change its path to enable video recording and storage, but that's working fine now. All is well here for now! :)

Grazie.congratulations_oops